METREL MI 2893 User Manual

MI 2893 / MI 2892 / MI 2885 General Setup submenu
128
Figure 97: Set date/time screen
Table 113: Description of Set date/time screen
Clock source
Show clock source:
RTC – internal real time clock
GPS – external GPS receiver
Note: GPS clock source is automatically set if GPS is enabled and
detected.
Time zone
Selects time zone.
Note: MI 2893/MI 2892/MI 2885 has the ability to synchronize its
system time clock with Coordinated Universal Time (UTC time)
provided by externally connected GPS module.
In that case only time zone (in 15 min intervals) can be adjusted. In
order to use this functionality, see 4.2.6.
Current Time & Date
Show/edit current time and date (valid only if RTC is used as time
source)
Table 114: Keys in Set date/time screen
Selects parameter to be changed.
Modifies parameter.
Selects between the following parameters: hour, minute, second, day, month
or year.
Enters Date/time edit window.
Returns to the “GENERAL SETUP” submenu.
ENTER

METREL MI 2893 Specifications

General

Brand	METREL
Model	MI 2893
Category	Measuring Instruments
Language	English