METREL MI 2893 User Manual

MI 2893 / MI 2892 / MI 2885 Applicable standards
17
Do not remove microSD memory card while instrument is recording or reading data. Record
damage and card failure can occur.
1.3 Applicable standards
The MI 2893/MI 2892/MI 2885 are designed and tested in accordance with the following standards:
Electromagnetic compatibility (EMC)
EN 61326-1: 2021
Electrical equipment for measurement, control and laboratory
use – EMC requirements – Part 1: General requirements
EN 61326-2-2: 2021
Electrical equipment for measurement, control and laboratory
use – EMC requirements –
Part 2-2: Particular requirements - Test configurations,
operational conditions and performance criteria for portable
test, measuring and monitoring equipment used in low-
voltage distribution systems
 Emission: Class A equipment (for industrial purposes)
 Immunity for equipment intended for use in industrial
locations
Safety (LVD)
EN 61010-1: 2010 + A1:2019
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 1: General requirements
EN 61010-2-030: 2021 + A11:2021
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 2-030: Particular requirements for testing and measuring
circuits
EN 61010-031: 2015 + A1:2021 +
A11:2021
Safety requirements for electrical equipment for
measurement, control and laboratory use –
Part 031: Safety requirements for hand-held probe assemblies
for electrical measurement and test
EN 61010-2-032: 2021 + A11:2021
Safety requirements for electrical equipment for
measurement, control and laboratory use
Part 032: Particular requirements for hand-held and
hand-manipulated current sensors for electrical test and
measurement
Measurement methods
IEC 61000-4-30: 2015 + A1:2021
Class A
Electromagnetic Compatibility (EMC) –
Part 4-30: Testing and measurement techniques - Power
quality measurement methods
IEC 61557-12: 2018 + A1:2021
Electrical safety in low voltage distribution systems up to 1 000
V a.c. and 1 500 V d.c. - Equipment for testing, measuring or
monitoring of protective measures – Part 12: Performance
measuring and monitoring devices (PMD)
IEC 61000-4-7: 2002 + A1: 2008
Electromagnetic compatibility (EMC) –
Part 4-7: Testing and measurement techniques –General guide
on harmonics and inter-harmonics measurements and
instrumentation for power supply systems and equipment
connected thereto
IEC 61000-4-15: 2010/ISH1:2017
Electromagnetic compatibility (EMC) –

METREL MI 2893 Specifications

General

Brand	METREL
Model	MI 2893
Category	Measuring Instruments
Language	English