METREL MI 2893 - 1 Introduction

MI 2893 / MI 2892 / MI 2885 Introduction
14
1 Introduction
MI 2893/MI 2892/MI 2885 are handheld multifunction instrument for power quality analysis, high speed
transient capturing (MI 2893), transient capturing (MI 2892/MI 2885) and troubleshooting as well as
energy efficiency measurements.
Figure 1: Power Master XT instrument
Product differentiation:
MI 2893/2892/2885 sharing same measuring hardware and firmware platform.
MI 2893 – Class A Power Quality Instrument with additional transient measuring board with sampling
period 1 MHz
MI 2892 - Class A Power Quality Instrument with transient measurement on measuring board with
sampling period 49 kHz
MI 2885 - Class S specified Power Quality Instrument with transient measurement on measuring board
with sampling period 49 kHz
Note:
The appearance of the product is outwardly the same. The only differences are in the marking labels and
the front plates.