To Next Page

To Previous Page

MI 2893 / MI 2892 / MI 2885 General Setup submenu

127

Table 111: Description of Communication setup options

PC connection

Select USB or INTERNET, INTERNET (3G / GPRS), INTRANET (LAN)

communication port.

Com Port (PS/2)

Select GPS or MI 3108 / MI 3109 communication. GPS is used for A

1355 GPS receiver, and MI 3108 / MI 3109 for photovoltaics inverter

measurements (See MI 3108/ MI 3109 User manual).

Modem used in A 1565

Select this option if A 1622 WiFi / 3G modem is used within A 1565

Waterproof case for outdoor application and recordings

DHCP

Select Enabled in order to enable automatic network parameters

assignment. Select Disabled in order to enter them manually.

Secret key

Valid only if INTERNET communication is selected. Secret number

will assure additional protection of communication link. Same

number should be entered in PowerView v3.0, before connection

establishment.

MAC address

Instrument Ethernet MAC address.

Instrument host name

Instrument host name.

Instrument IP address

Instrument IP address.

Note: For more information regarding configuration, how to download data, view real time measuring

data on PowerView and establish Remote instrument connection with PowerView over internet and USB

communication interfaces, see section 4.3 and PowerView Instruction manual.

Table 112: Keys in Communication setup

Changes communication source: USB, INTERNET, INTERNET (3G, GPRS)

Moves cursor position during entering Secret key.

Cursor keys. Selects parameter.

Changes Secret key number.

Enters Secret key edit window.

Returns to the “GENERAL SETUP” submenu.

3.24.2 Time & Date

Time, date and time zone can be set in this menu.

ENTER

METREL MI 2893 User Manual

Questions and Answers: