Metz Axio pro - Page 49

49
12.6 Sound Settings, Overview
“HiFi output“ “Sound settings“
HiFi output
“variable“
Speakers
“On“
The volume on the “AUDIO OUT sockets” on the
back panel of the TV set is adjustable.
The sound is also output via the speakers of the TV
set.
The volume of the TV set speakers and the volume
on the “AUDIO OUT sockets” can be changed with
the V-/V+ button of the remote control.
Speakers
“Off“
The volume on the “AUDIO OUT sockets” on the
back panel of the TV set is adjustable.
The sound is not output via the speakers of the TV
set. The symbol for the mute setting appears on the
screen ı
The volume on the “AUDIO OUT sockets” can be
changed with the -+ button of the remote control.
Speakers
“Center“
The sound of an AV device connected to the “CEN-
TRE IN socket” (e.g. Surround decoder) is output
through the speaker of the TV set.
That way, the speakers of the TV set are used as
“Centre speakers”.
Change with
Accept value with .
– +
OK
Mute (two-stage) on Speakers
on
Function for F2
Function for F1
EURO sockets
DVB-C
2)
DVB-T
2)
DVB-S
2)
Analog-TV
Country
Language
Operating
Configuration
F1
➔
HiFi output variable
Subtitle
Data Logic adjustment
CI dialogue via
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Time shift
2)
Init. prog.position
Subtitle
Data Logic adjustment
CI dialogue via
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Time shift
2)
Init. prog.position