Microplex SOLID F44 - Page 101

Appendix A Programming Guide
A-8
PJL COMMAND(cont.) Description
@PJL RDYMSG ["text of
message”]
Displays a message in the 1
st
line of the printer´s operator
panel
The message length is at max. 16 characters
The printer remains online
@PJL RDYMSG ["”] Clear the message on the printer´s operator panel
@PJL OPMSG ["text of
message”]
Displays the message in the 1
st
line of the printer´s
operator panel
The message length is at max. 16 characters
The printer gets off line
After prompting of this status by pushing the offline/online
button, the printer goes ONLINE again
@PJL INQUIRE
[ LPARM : personality ] Variable
Requests the current value for an environment variable.
personality = PCL, HEXDUMP
port =
For supported variables and values see table:
A-2.1.4 PJL Variables and Values
@PJL DINQUIRE
[ LPARM : personality ] Variable
Requests the default value for an environment variable.
personality = PCL, HEXDUMP
port =
For supported variables and values see table:
A-2.1.4 PJL Variables and Values
@PJL INFO category Requests specified category of printer information.
Supported categories are:
ID : Printer ID is PP3034
CONFIG : Printer configuration
MEMORY : Printer memory
STATUS : Printer status
VARIABLES : List of Environment variables
USTATUS : List of USTATUS variables
PROFILES : List of PROFILES