Troubleshooting and Diagnostics
6-2
6.2 Status and Error Messages
After self test the printer enters the ONLINE mode.
In case of a failure the printer changes into the OFFLINE state and one of the
following messages may appear on the display:
6.2.1 Information Messages
6.2.2 Error Messages
Display That means ...
Measure
ONLINE
The printer is ready for
printing
none
OFFLINE
[ONLINE] key is pressed; or
there is an error (6.2.2 Error
Messages)
Press [ONLINE] key again; or
fix errors
POWER SAVE
After a period of time defined
by the parameter power save
without printing the printer
changes into the state power
save
none; the next print job
changes the status
WARMING UP Warming up before printing wait
TONER LOW
Toner will be less, but
continue printing until the
printout is not dark enough
order a new Image Cartridge
Display That means ...
Measure
COVER OPEN top cover is open Close cover
JAM TRACTOR Paper jam at Tractor
Clear the paper path and
insert paper again (see
chapter 5.2)
JAM NEAR IC
Paper Jam near the Image
Cartridge
Removing IC, clear paper
path and insert IC(see
chapter 5.2)
JAM NEAR FUSER Paper Jam near the Fuser unit
Clear the paper path and
insert paper again(see
chapter 5.2)
TONER EMPTY No toner Insert a new Image Cartridge
To Next Page
Loading...
