Microplex SOLID F44 - TEST MODE and INFO MENU

Beschreibung der einzelnen Menüpunkte
4-14
4.4 TEST MODE
Within the TEST MODE general printer status information can be accessed and test
printouts can be generated.
The TEST MODE is split into:
– TEST MENU
– INFO MENU
4.4.1 Submenu TEST MENU
PANEL TEST
Use this point to check all Operator Panel display functions.
SELF TEST
This selection starts the printout of the test page with the actual configuration
settings of the actual Profile and diagonal character test (see Paragraph 3.2.1 How
to Start the SELF TEST)
CONT. SELF TEST (Continuous Self test)
If this function is selected the printer continuously prints the test page (see SELF
TEST) until [ONLINE] is pressed.
CONFIG. PRINT (Configuration Print)
This selection starts a printout of all Profiles with the information about the PAPER
MENU, PCL MENU, GENERAL MENU, and the CONFIG. MENU (see Paragraph
3.3 Printout of all Profiles)
PCL TYPE LIST
By activating the PCL TYPE LIST a printout of all available PCL Typefaces is
started including information about the scalability and corresponding font number.
Typeface Pitch / Point Font #
Courier SWC scalable I 0
Dutch801 SWC scalable I 1
Dutch801 SWC Bold scalable I 2
Dutch801 SWC Italic scalable I 3
Dutch801 SWC Bold Italic scalable I 4
ZapfHumst Dm SWC scalable I 5
ZapfHumst Dm SWC Bold scalable I 6
ZapfHumst Dm SWC Italic scalable I 7
ZapfHumst Dm SWC Bold Italic scalable I 8
Ribbon 132 SWC Italic scalable I 9
Clarendon SWC Condensed Bold scalable I 10
Swiss742 SWC scalable I 11
Swiss742 SWC Bold scalable I 12
Swiss742 SWC Italic scalable I 13
Swiss742 SWC Bold Italic scalable I 14
Swiss742 Cn SWC Condensed scalable I 15
Swiss742 Cn SWC Condensed Bold scalable I 16
Swiss742 Cn SWC Condensed Italic scalable I 17
Swiss742 Cn SWC CondensedBold Italic scalable I 18