Microplex SOLID F44 - Label Properties

Paper Specification
8-9
8.4.5 Label Properties
Description Specifications Applicable Standard / Method
condition no callous, folds, holes, no
raised parts
DIN 6730
specific
volume
(1.3 ± 0.2) cm/g DIN EN ISO 438
arch maximum 5 mm DIN 6724
break stability vertical minimum 65 N
horizontal minimum 40 N
DIN 53 112
roughness by
Bendtsen
200 to 500 ml/mim DIN EN ISO 2494
bending force minimum 0.1 Nmm DIN 53 121
measure distance: 10 mm
bending angle: 12°
humidity
stretching
for every 10% difference of
humidity between
40 and 60%
length maximum 0.04%
cross maximum 0.2%
DIN 53 130
electrical
surface
resistivity
10
8
to 10
10
ohms/square
inch (conditioned at 23°C
and 50% RH)
PTS-P: 101/84
electrical
volume
resistivity
< 10
10
ohms/square inch
(conditioned at 23°C and
50% RH)
DIN 53 482
relative
humidity
(40 ± 7) % at (21 ± 2)°C DIN EN ISO 287