Explanation of Individual Menu Items
4-3
4.2 Menu Mode CHANGE PROFILE
Configuration of one specific Profile.
4.2.1 Submenu PAPER MENU
PAPER
A choice out of three different paper sizes can be made:
A4
LETTER
CUSTOM
If A4 or LETTER is selected the printer automatically sets all parameters which
define the allocation of the print image on a page. Those parameter values are in
accordance to the PCL5 definition.
In case of A4 the contents of an A4 page is printed asymmetrically onto a 12 inch
form which leads to a larger bottom margin than top margin.
In case of LETTER the page contents are printed onto an 11 inch form.
Note: If the paper size is changed from one format into another the printer
selects the default values of the format describing parameters (PAPER
LENGTH, IMAGE WIDTH etc.) which belong to the chosen paper size.
Paper size (PAPER) can be selected at the control panel or by means of
PCL- or PJL-commands from the host system (see also PAPER
SELECTION).
PAPER LENGTH
1)
The paper length (physical paper length) can be selected in the range from 3 inch
(76.2 mm) up to 20 inch (508.0 mm) in steps of
1
/
6
(4.23 mm) or
1
/
4
inch (6.35 mm):
3; 3
1
/
6
; 3
1
/
4
; 3
1
/
3
; 3
1
/
2
3
3
/
4
; 3
5
/
6
; 4;..........12; .........20
If the printer is
used with the iPS F44, the minimum paper length is 7 inch
(117.8 mm) and the maximum paper length is 17 inch (431.8 mm).
Note: If ORIENTATION = LANDSCAPE is selected the paper length now
corresponds to the page width.
.
1)
This menu item is only displayed if PAPER size CUSTOM is selected.
To Next Page
Loading...
