Microplex SOLID F44 - List of Supported PCL5 Control Functions; A-3.1 Job Control Commands

Appendix A Programming Guide
A-13
A-3 List of Supported PCL5 Control Functions
A-3.1 Job Control Commands
JOB CONTROL COMMANDS Description
ESC % - 12345 X Universal Exit / Start of PJL
Change to PJL Language Interpretation Mode Reset
the printer like performing a Reset command
Print all data received before the UEL command
ESC E Reset
Reset to PJL Current Environment
Printing of any partial pages
Deleting of all temporary download resources, as
macros, fonts, and patterns
ESC & l # X
Number of Copies
Number of printed copies for each page
ESC & l # U
Left Offset Registration
Position of the logical page across the width of the
physical page
ESC & l # Z
Top Offset Registration
Position of the logical page along length of the physical
page
ESC & u # D Unit of Measure
Measure for PCL unit cursor movements