Configuring the Printer
3-8
PCL-MENU
Note: The PCL MENU will be displayed if the EMULATION in the
GENERAL MENU is set to PCL
Entry Point = CHANGE PROFIL ---> PCL-MENU
1) Depending on selected FONT NUMBER
PARAMETER VALUE
FONT NUMBER 0 *
( Range: Font No. 0 up to 54)
PITCH 1) 10.00 *
(for Font No. 0, 39 up to 44 are values
0.44 up to 99.99 CPI possible)
POINTSIZE 1) 12.00 *
(for Font No 1 up to 38 are values 4.00
up to 999.75 in steps of 0.25 points
possible)
SYMBOL SET ROMAN-8 *
ISO L1
::
( 33 symbol sets are selectable )
LINE SPACING 6 Lines / inch *
( Range: 1,2,3...48 LPI )
TOP MARGIN
(only for CUSTOM)
0 Lines *
( Range: 0 up to 999 lines )
LEFT MARGIN
(only for CUSTOM)
0 Columns *
(Range: 0 up to 999)
RIGHT MARGIN
(only for CUSTOM)
MAXIMUM *
( Range: 0 up to 999 and MAXIMUM)
TEXT LENGTH
(only for CUSTOM)
72 Lines *
( Range: 0 up to 999 lines)
PERF SKIP
(only for CUSTOM)
OFF *
ON
$$ COMMANDS OFF *
ON
To Next Page
Loading...
