Beschreibung der einzelnen Menüpunkte
4-8
4.2.2 PCL MENU
The PCL Menu defines the parameters that are responsible for page creation and
presentation of characters on a page.
Note: The PCL MENU will only be displayed if EMULATION = PCL is selected in
the GENERAL MENU.
FONT NUMBER
The font number selects one of the 55 PCL typefaces as the default font within the
PCL emulation. A printout of the PCL TYPE LIST can be started within the TEST
MENU. Default is font no. 0 (COURIER)
PITCH
Pitch defines the character size for FONT NUMBER 0 and 39 up to 44. Any value
from 0.44 to 99.99 CPI can be selected.
Default value is 10.00 characters per inch.
POINT SIZE
For FONT NUMBER 1 to 38 characters scaling is defined as point size. Values
can be selected from 4.00 to 999.75 PT in steps of 0.25.
Default value is 12.00 PT.
Note: FONT NUMBER 45 up to 54 is not scalable; neither the menu item PITCH or
POINT SIZE is applicable.
SYMBOL SET
Symbol Set means a code table of characters and symbols.
Factory default is the ROMAN-8 symbol set. One of the following 36 different Sets
can be chosen being the standard set in PCL (see also Appendix B Character
Sets).
Display Symbol Set ID Number
ROMAN-8 Roman-8 8U
ISO L1 ISO 8859/1 Latin 1 0N
ISO L2 ISO 8859/2 Latin 2 2N
ISO L5 ISO 8859/9 Latin 5 5N
ISO L9 ISO 8859/15 Latin 9 9N
PC-8 PC-8 Code Page 437 10U
PC-8 DN PC-8 Danish/Norwegian 11U
PC-850 PC-850 Multilingual 12U
PC-852 PC-852 Latin 2 17U
PC-858 PC-858 Multilingual 13U
PC-8 TK PC-Turkish 9T
WIN L1 Windows 3.1 Latin 1 19U
WIN L2 Windows 3.1 Latin 2 9E
WIN L5 Windows 3.1 Latin 5 5T
DESKTOP Desktop 7J
PS TEXT PS text 10J
VN INTL Ventura International 13J
To Next Page
Loading...
