4-1
4. Explanation of Individual Menu Items
In OFFLINE mode
− the different PROFILES can be programmed,
− the BASIC SETTINGS can be configured,
− and the printer can be set into the TEST MODE.
Note: All following functions are in the OFFLINE mode selectable by using the
arrows keys (see also chapter 2.2 Function Keys).
TEAR OFF FORM
After pressing the paper is moving depending on the selected paper length to
the tear off position and can be separated. Then the paper moves backwards to
the printing position.
SELECT PROFILE
To activate one out of 50 possible set up parameter blocks called Profiles, for
quickly changing the application specific printer set up.
FEED N PAGES
Pressing causes a feed by N pages, depending on the set form length. The
value is between 1 - 16 pages and can be changed via the menu.
This function can also be generated blank pages in a print job by inserting a new
batch and the confirmation of select fold.
Pressure on the button is pushed forward one page. It should be noted that
after each page of the paper feed again only needs to stand before a re-pressing
the arrow key causes a further feeding to another page. When the [ONLINE]
button is pressed, the pressure started or continued
SELECT FOLD
The standard setting for the tractor is POSITIV fold. In this case check that the fold
behind the first page is a positive one (fold points upwards).
If it is not possible to lose a page and the fold point downwards use the parameter
to change the standard setting to NEGATIVE.
Note: This fold setting must occur every time when paper is newly inserted!
To Next Page
Loading...
