Preface
XVI
7. Technical Data
All technical details or data about the printer can be found here.
8. Paper Specification
Guidelines, paper and label properties, and storage and environmental conditions
are defined in this chapter.
Appendix A Programming
This appendix describes com
mands extension of PCL5 and PJL in section 1
and 2. The Bar code programming is described in section 5. These
command structures are valid for the SOLID F44 Laser Printer with PCL5
Emulation.
Appendix B Symbol Sets
All supported Symbol Sets are listed here.
Appendix C Order Numbers
Here the user can find the order numbers of the consumables.
Conventions used in this Guide
The following conventions ars used:
Bold Heaslines and important information
Note: Contains special advice to facilitate handling.
Coution: Contains important information to prevent damage of the
equipmant.
[ONLINE] or Key function are always depicted in brackets or indicated by the
corresponding symbol.
The front of the printer is the side with the paper input and the control panel. From
this perspective, are the terms left or right.
To Next Page
Loading...
