Explanation of Individual Menu Items
4-2
CHANGE PROFILE
To change one out of 50 possible set up parameter blocks called Profiles,
determining the application specific printer set up.
Note: Each profile contains all print job relevant set up parameters specifying the
features and functions grouped into different submenus like PAPER MENU,
PCL MENU, and GENERAL MENU. For details see chapter 4.2.
To facilitate the adjustment of the profiles, the program Profiler F44 can be
used.
BASIC SETTINGS
In this Menu mode it is possible, to configure all the basic operation related
features of the printer. (e.g. POWER SAVE, LANGUAGE, MENU ACCESS)
TEST MODE
This function initiates a printout of the parameter settings, Profile definitions, and
PCL typeface list. This printout is helpful for future reference and in case a Profile
need to be changed.
RESET PRINTER
This function is used to restart the printer after cancelling a print job again. Select
the setting to YES. After processing RESET PRINTER, the printer automatically
switches to the status of NO.
Note: Before starting this function, cancel the print job on the host system.
4.1 Menu Mode SELECT PROFILE
Activation of one out of the 50 profiles.
To Next Page
Loading...
