Microplex SOLID F44 - Typical Paper Properties for Laser Printers

Paper Specification
8-5
8.4.2 Typical Paper Properties for Laser Printers
Description Specifications Applicable Standard /
Method
curl 5mm (0.2 inch);
no diagonal curl at
conditioned (23 " 2)°C
and (15 ± 5) % RH
stability of
dimension cross to
paper path
maximum 0.8%
in heat chamber at
110°C for 20 minutes
electrical surface
resistivity
10
8
to 10
10
ohms/square inch
(conditioned at 23°C
and 50% RH)
PTS-P: 101/84
electrical volume
resistivity
< 10
10
ohms/square
inch (conditioned at
23°C and 50% RH)
DIN 53 482
high-temperature
stability
< 0.4 % DIN 54 354
raise dust no loose parts; paper
should be free from
dust
DIN 53 109
fusing compatibility must not scorch, melt,
offset, or release
hazardous emissions
when heated to 190°C
(395°F) for nearly 0.1
second
FOGRA-Method