A-1
Appendix A Programming Guide
The printer SOLID F44 supports the PJL Printer Job Language and PCL5
Printer Language.
All the printer´s unique features and functions can be controlled by the application
software via PJL or PCL5 commands.
Among those functions are the following:
Job Control Support using profiles see paragraph A-1.1
Support of various paper sizes see paragraph A-1.2
Support of semi graphics for application under SAP/R3see paragraph A-1.3
Euro symbol support see paragraph A-1.4
Support of Logical and Physical Pages see paragraph A-1.5
Conventions see paragraph A-1.6
List of Supported PJL Control Functions see chapter A-2
List of Supported PCL5 Control Functions see chapter A-3
Support of Semi graphics for SAP/R3 see chapter A-4
Support of resident barcodes by special PCL5 commands see chapter A-5
Note:
For more information regarding PJL and PCL5 programming please refer to
the:
– PJL Printer Job Language (5961-0704)
– PCL5 Printer Language Technical Reference Manual (5961-0509) published
by Hewlett-Packard
®
Company.
To Next Page
Loading...
