Appendix A Programming Guide
A-12
A-2.1.5 List of Supported PJL Variables and Values for PCL Personality
The following variables can be programmed by the PJL commands:
– @PJL SET LPARM : PCL “variable” = “value”
– @PJL DEFAULT LPARM : PCL “variable” = “value”
PJL VARIABLE VALUES
FONTNUMBER 1, 2, 3, ....., 54
PITCH 0.44, ....., 99.99 (in steps of 0.01)
PTSIZE 4.00, 4.25, ....., 999.75 (in steps of 0.25)
SYMSET ROMAN8, ISOL1, ISOL2, ISOL5, ISOL9, PC8, PC8DN,
PC850, PC852, PC858, PC8TK, WINL1, WINL2,
WINL5, DESKTOP, PSTEXT,VNINTL, VNUS,
MSPUBL, MATH8, PSMATH, VNMATH, PIFONT,
LEGAL, ISO4, ISO6, ISO11, ISO15, ISO17, ISO21,
ISO60, ISO69, WIN30, WINBALT
LINESPACING 1, 2, 3, ....., 48
TOPMARGIN 0, 1, 2, ....., 999
LEFTMARGIN 0, 1, 2, ....., 999
RIGHTMARGIN 0, 1, 2, ....., 999, MAXIMUM
TEXTLENGTH 1, 2, ....., 999
PERFORATIONSKIP OFF, ON
DOLLARCOMMANDS OFF, ON
Note: All parameter which can be programmed with PJL Variables can also be
configured by the Operator Panel of the printer.
For detailed description of parameters see Chapter 4 Explanation of
Individual Menu Items
To Next Page
Loading...
