Microplex SOLID F44 - Menu Item Description; Select Profile

Configuring the Printer
3-6
3.5 Menu Item Description
OFFLINE
The following table show menu modes, submenus and parameters.
Precondition is: Access to all menu items is allowed. (MENU ACCESS = ALL)
Otherwise restrictions are to observed.
SELECT PROFILE
Entry Point = SELECT PROFIL
Note:
An asterisk (*) after the value indicates the actual setting!
PARAMETER VALUE
TEAR OFF FORMS
SELECT PROFILE see below
FEED N PAGES 1.......16
SELECT FOLD
POSITIVE | < *
NEGATIVE | >
CHANGE PROFILE see below
BASIC SETTINGS see below
TEST MODE see below
RESET PRINTER
NO *
YES
PARAMETER VALEUE
SELECT PROFILE 1 *
2
..
..
50