Appendix A Programming Guide
A-10
PJL VARIABLE (cont.) VALUES
ORIENTATIONMODE FIXED, AUTOMATIC
PAPEREXTENDED NO, YES
PAPERSELECT RECOGNIZE, ONLYPJL, IGNORE
FUSERTEMP LOW, MIDDLE, HIGH
TONERDENSITY XLOW, LOW, MIDDLE, HIGH, XHIGH;
HUMIDITY NORMAL, HIGH
VERSHIFT -50, -49, ....., -1, 0, 1, 2, ....., 50
HORSHIFT -50, -49, ....., -1, 0, 1, 2, ....., 50
PERSONALITY PCL, HEXDUMP
AUTOFORMFEED OFF, 1, 2, ....., 120
AUTOTEROFF OFF, 1, 2, ....., 120
PAPERRETRACT ON, OFF
TEAROFFTIME 0, ..... 120
Note: All parameters which can be programmed with PJL variables can also be
configured by the Operator Panel of the printer.
For detailed description of parameters see chapter 4 Explanation of
Individual Menu Items
PJL VARIABLE VALUES
UEL RECOGNIZE, IGNORE
Note: This parameter is only active if PERSONALITY = HEXDUMP is selected.
To Next Page
Loading...
