I
Safety Regulations for the Laser Printer SOLID F44 and the
intelligent Paper Stacker iPS F44
The laser printer SOLID F44 and the intelligent Paper Stacker iPS F44 fulfil
the safety regulations
according to IEC EN 60950-1for information technology
equipments.
The mains cable must be connected only to a grounded protected wall-socket. The
printerĀ“s mains voltage must agree with the local mains voltage.
The power plug must be easily accessible at any time so that it can be disconnected
immediately in case of danger or for maintenance purposes.
Before installing the printer, check the surrounding conditions in which the printer is
intended to be used (see next page, Operating Environment).
During thunderstorm you should never attempt to connect or disconnect any data
transfer cable.
The power supply should only be opened and checked by authorized personnel.
Maintenance beyond the descriptions of chapter 5 may only be attempted by
authorized personnel. Considerable dangers can arise through inappropriate repairs
for the user.
This symbol is standing for a hot surface.
Attention: danger of burning!
Note : It is to guarantee for the printer standing in a well ventilated room.
To Next Page
Loading...
