Printer Operation
2-5
Selection of functionen and parameters at a certain menu level:
− Press or ; the keys have a wrap around function, i.e. after the last
value the first value is repeated.
After selecting CHANGE PROFILE by pressing you have entered the main
function level of the Menu Mode:
CNG PROFILE nn (nn = 1 up to 50; depending on the selection)
PAPER MENU
The next, but not visible items are:
PCL MENU
GENERAL MENU
To switch to the next level first scroll with the key to the requested menu
item below the head line. Then press .
Now you are in a Sub function. Movement in both directions is possible by using the
key or the key .
If the selection is e.g. PCL MENU the display will indicate:
PCL-MENU
FONT NUMBER
The next, but not visible items are:
PITCH or POINT SIZE (depending on selected Font)
SYMBOL SET
LINE SPACING
TOP MARGIN
LEFT MARGIN
RIGHT MARGIN
TEXT LENGTH
PERF. SKIP
$$ COMANDS
Now select the requested menu item of this menu (for example PERF. SKIP) by
pressing until PERF. SKIP following by to enter the lowest level.
At the last level to select/confirm values, the asterisk (*) at the right indicates the
actual selection.
PERF. SKIP
OFF *
ON
By using the or key you are able to change OFF into ON.
Press the confirmed value is displayed with an asterisk (*) in the last position as
shown in the sample before.
To Next Page
Loading...
