A-28 QX-830 Compact Industrial Scanner User’s Manual
Serial Commands
Source
Daisy Chain ID Status
Daisy Chain ID
Serial Cmd: <K162,mode,source,daisy chain i.d. status,daisy chain i.d.>
Default: 1 = RS-232 on QX-830 Connector B
Options: 0 = RS-232 on QX-830 Connector A
1 = RS-232 on QX-830 Connector B
2 = RS-422 on QX-830 Connector B
4 = Ethernet TCP Port 1
5 = Ethernet TCP Port 2
Serial Cmd: <K162,mode,source,daisy chain i.d. status,daisy chain i.d.>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K162,mode,source,daisy chain i.d. status,daisy chain i.d.>
Default: 1/
Options: One or two ASCII characters.
To Next Page
Loading...