Microscan QX-830 - Page 319

QX-830 Compact Industrial Scanner User’s Manual A-31
Appendices
Multisymbol Separator
Start Trigger Start Character (Non-Delimited)
Stop Trigger Stop Character (Non-Delimited)
Processing Timeout
Scan Speed
Maximum Element
Automatic Gain Control
AGC Level
AGC Mode
Serial Cmd: <K222,number of symbols,multisymbol separator>
Default: , (comma)
Options: Any 7-bit ASCII character
Serial Cmd: <K229,start character>
Default: NULL (0x00)
Options:
Two hex digits representing any ASCII character except < , > , XON , and XOFF .
Serial Cmd: <K230,stop character>
Default: NULL (0x00)
Options:
Two hex digits representing any ASCII character except < , > , XON , and XOFF .
Serial Cmd: <K245,processing timeout>
Default: 200 (0.2 seconds)
Options: 1 to 65535
Serial Cmd: <K500,scan speed>
Default: 30 (300 scans per second)
Options: 30 to 140 (x10 scans per second)
Serial Cmd: <K502,maximum element>
Default: 400 (x 0.01% of scan)
Options: 50 to 5000
Serial Cmd: <K504,AGC level,AGC mode,minimum gain,maximum gain>
Default:
40 (QX-830 model-dependent – see Microscan Product Pricing Catalog)
Options: 0 to 255
Serial Cmd: <K504,AGC level,AGC mode,minimum gain,maximum gain>
Default: 2 = Continuous
Options: 0 = Disabled 1 = Leading Edge 2 = Continuous