Microscan QX-830 - Page 334

A-46 QX-830 Compact Industrial Scanner User’s Manual
Serial Commands
Fixed Symbol Length Status (PDF417)
Fixed Symbol Length (PDF417)
Decode at End of Read Cycle (PDF417)
Pharmacode
Fixed Symbol Length Status (Pharmacode)
Fixed Symbol Length (Pharmacode)
Serial Cmd: <K476,status,scan line limit,fixed symbol length status,fixed symbol
length,unused,decode at end of read cycle>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K476,status,scan line limit,fixed symbol length status,fixed symbol
length,unused,decode at end of read cycle>
Default: 10
Options: 1 to 2710
Serial Cmd: <K476,status,scan line limit,fixed symbol length status,fixed symbol
length,unused,decode at end of read cycle>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K477,status,fixed symbol length status,fixed symbol length,minimum
bars,bar width status,direction,fixed threshold value>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K477,status,fixed symbol length status,fixed symbol length,minimum
bars,bar width status,direction,fixed threshold value>
Default: 0 = Disabled
Options: 0 = Disabled 1 = Enabled
Serial Cmd: <K477,status,fixed symbol length status,fixed symbol length,minimum
bars,bar width status,direction,fixed threshold value>
Default: 10
Options: 1 to 16