EasyManua.ls Logo

MIMAKI CG-FX SERIES - Safe Handling and Operation Practices

MIMAKI CG-FX SERIES
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– viii –
Precautions in use
CAUTION
Be careful with the movable parts
Do not touch a rolling grit roller,
or may hurt fingertips or tear off
finger nails
Keep head and hands away from
any moving parts during plot
operation, or may cause
accidental injuries.
Wear proper clothes. (Do not
wear such as loose-fit clothes
and accessories).
Bind a long hair.
Sheets
If media that is likely to tightly
curl, flatten first the paper before
using it for printing. Heavily-
curled sheet affect the Cut
(plotted) result.
Caution with cutters
Do not touch the edged cutter
blade.
Do not swing a cut holder to
avoid danger. The blade may be
lunged out.
Warning labels
Be sure understand firmly the
warnings given on the labels. In
the case where any of the
warning label has become so
soiled that the warning message
is illegible or has come off,
purchase a new one from your
local distributor or our office.
Refer to Appendix for the label
adhering locations.

Table of Contents

Other manuals for MIMAKI CG-FX SERIES

Related product manuals