– 3.24 –
Switch the displayed language [DISPLAY]
The displayed language can switch to other languages as follows.
Setting value
Japanese
English
German
French
Spanish
Italian
Portuguese
* The default is set to English.
Change the language as needed.
Set each functions [SET UP]
(Refer to Page 3.25)
N GO K
• When “Front cut off” is enabled, the leading edge of the sheet is cut at start
of [SHEETCUT].
A constant cut length may not be obtained if the leading edge is askew or if
the cut end of the sheet is not neat.
The “Front cut off” is designed to cut the leading edge at start of operation to
ensure a constant cut length.
To Next Page
Loading...
Need help?
General
