MIMAKI CG-FX SERIES User Manual

– 2.2 –
Operation
The following shows a series of operations and settings, ranging from power-on to end of cutting
(plotting). For details on each item, refer to the reference page.
Tool P. 2.3
Turn on the power on P. 2.7
Set the tool conditions P. 2.8
Set the sheet P. 2.13
Execute test cutting (plotting) P. 2.19
Start the cutting (plotting) P. 2.20
Turn off the power P. 2.22

MIMAKI CG-FX SERIES Specifications

General

Brand	MIMAKI
Model	CG-FX SERIES
Category	Plotter
Language	English