MIMAKI UCJV300-75 - Page 82

3-20
Chapter 3 Machine Setting
14
Press to set a user
name, and press the key.
•Press [][][][] to set the user name to be
used for authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
15
Press to select "PASSWORD",
and press the key.
16
Press to set a
password, and press the key.
•Press [][][][] to set the password to be
used for authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• When you select [POP before SMTP] in the Step
11, set the items in the Step 16 to 19.
17
Press to select "POP3
ADDRESS", and press the key.
18
Press to set a POP3
address, and press the key.
•Press [][][][] to set a POP server.
• Input the POP server name.
19
Press to select "APOP", and
press the key.
20
Press to set ON/OFF, and press
the key.
21
Press the key several times to
end the setting.
• On the password setting screen, you can
only check the value that you are currently
inputting.