MIMAKI UCJV300 Series User Manual

Chapter 7 Troubleshooting
175
Error
number
Message Cause Corrective action
151 Main PCB V1R2
• A problem was detected with
the main circuit board power
supply circuit.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
152 Main PCB V2R5
153 Main PCB V3R3
154 Main PCB V05
155 Main PCB V36-1
157 Main PCB VTT
158 Main PCB V36-2
15f HEAD DRIVE HOT
• The COM drive has
overheated.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
16e Main PCB V3R3B
• A problem was detected with
the main circuit board power
supply circuit.
171 NEW HEAD CONNECT
• A new print head connection
was detected.
18a Main PCB V_CORE
• A problem was detected with
the main PCB power supply.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
18b Main PCB V1R5B
18c Main PCB V12
18e FLS NOT COMP
• A problem was detected with
the print head control.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
18f OFSET START
18f OFSET END
19f LED Connection Error
• The UV-LED PCB could not
be detected.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
1dc Station4 PCB V24
• A problem was detected with
the Station4 PCB power
supply.
• Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
1dd Station4 PCB V24-A
1e6 PRAM Size Shortage
• Insufficient memory • Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
201 Command Error
• Data other than print (RIP)
data was received, or a
problem was detected with
the print (RIP) data received.
1. Clear the data and resend.
2. Check the USB cable connection.
"Using a USB 2.0 Interface
Cable"(P. 36)
3. Use a compliant USB cable. "USB
2.0 Interface Precautions"(P. 36)
4. Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
202 Parameter Error
• A problem was detected with
the print (RIP) data received.
206 Printing Mode
• Print (RIP) data was received
with print parameters that do
not allow printing.
• Change the output parameters and
profile using RIP software.
304 USB INIT ERR
• A problem was detected with
the USB cable connection.
1. Check the USB cable connection.
"Using a USB 2.0 Interface
Cable"(P. 36)
2. Use a compliant USB cable. "USB
2.0 Interface Precautions"(P. 36)
3. Turn off the power on the machine and
turn it on after a while. "Turning Off
the Power"(P. 34)
305 USB TIME OUT
7

MIMAKI UCJV300 Series Specifications

General

Print Technology	UV-LED inkjet
Max Print Resolution	1200 x 1200 dpi
Power Supply	AC 100-240 V, 50/60 Hz
Ink Type	UV-curable ink
Media Thickness	1 mm or less
Interface	USB, Ethernet
Operating System Compatibility	Windows 10, Windows 8.1, Windows 7
Ink Colors	CMYK, White, Clear