Chapter 1 Before Using This Product
45
3
Soak up any ink droplets on the special caps.
• Use a wipe filter to soak up ink droplets and prevent dripping.
4
Wipe off any ink on the special caps with paper wipes.
5
Remove the special caps from the ink bottles.
• If the special caps are tight, remove using a tightening tool.
Preparing Ink Bottles
1
Remove an ink bottle from its carton.
2
Shake the ink bottle to the left and right slowly at least 20 times.
• Tighten the ink bottle lid securely, then shake the bottle slowly from left to right to ensure that the
ink moves inside, holding the ink bottle lid with a paper towel.
• Shake slowly. Ink may leak out if the bottle is shaken too violently.
• When fitting a bottle with only a small amount of ink inside, flip the ink bottle upright and
shake slowly at an angle.
1
To Next Page
Loading...
