Chapter 3 Cutting
84
2
Select [TOOL CHANGE], then press the [ENTER] key.
• The cutter unit moves over the platen.
3
Open the front cover.
• The cutter unit can be moved manually. Move the cutter unit slowly to a position that allows easy
access for installing the cutter holder.
4
Turn the knob screw and loosen the holder presser.
5
Insert the cutter holder into the tool holder.
(1) Push the brim of the cutter holder against the tool holder.
(2) Put the brim of the cutter holder into the tool holder.
6
Secure the cutter holder.
• Turn the knob screw and fix the holder presser.
• Failure to secure firmly may result in lower quality.
7
Press the [ENTER] key once installation is complete.
8
Close the front cover.
To Next Page
Loading...
