MIMAKI UJF-7151 plus - Page 4

iii
Printing Operations at “Nozzle Missing” Judgment and Error Occurrence
3-30
Setting the Printing Check............................................................... 3-31
Setting the NOZZLE RECOVERY................................................... 3-31
Setting the Judgement Condition .................................................... 3-31
About INFORMATION MENU .................................................... 3-32
INFORMATION MENU table........................................................... 3-32
Displaying the Information............................................................... 3-33
Chapter 4 Maintenance
Routine maintenance ................................................................... 4-2
Precautions in cleaning ..................................................................... 4-2
When to care..................................................................................... 4-2
Tools required for maintenance......................................................... 4-2
Cleaning exterior surfaces................................................................. 4-3
Cleaning the table ............................................................................. 4-3
When this machine is left unused for a long time.............................. 4-3
About MAINTENANCE MENU ..................................................... 4-4
MAINTENANCE MENUs at-a-glance................................................ 4-5
Maintaining the Capping Station .................................................. 4-6
Cleaning the Wiper and Cap ............................................................. 4-6
Cleaning around the wiper ................................................................ 4-7
Washing the Ink Discharge Passage ................................................ 4-7
Cleaning the Ink Head and the Area around It ............................4-8
If does not resolve the nozzle clogging ........................................... 4-10
Cleaning of the LED UV unit ........................................................... 4-11
Nozzle Recovery Function ......................................................... 4-12
Other maintenance functions ....................................................... 4-13
Reset the set value.......................................................................... 4-13
Checking the UV Lamp Usage........................................................ 4-13
Setting Interval wiping ..................................................................... 4-14
Changing the Time When a Warning about Wiper Cleaning Is Issued 4-
14
Checking the Head Gaps at the Four Corners of the Table............ 4-15
Checking Ink Landing Displacement............................................... 4-15
Solve ink overflow and supply error problems................................. 4-15
Improve the Movement of Hard Cleaning ..............................................4-15
Replacing consumables .............................................................4-16
If a Waste Ink Tank Confirmation Message Appears...................... 4-16
Replacing the waste ink tank before the waste ink tank confirmation mes-
sage is displayed............................................................................. 4-17
Refilling antifreeze mixed water ................................................. 4-17
Refill antifreeze mixed water ........................................................... 4-18
Chapter 5 Troubleshooting
Troubleshooting ........................................................................... 5-2
Power does not turn on ..................................................................... 5-2