Mindray BeneVision TM80 Service Manual

3-88 TM80 Telemetry Monitor Service Manual
then the announced number of
devices that can connect to AP
simultaneously must be more than
32.
2, The AP Can create several SSIDs.
3 Device density The maximum number of devices
connected to one AP
simultaneously is 16 (including
TM80 and other devices).
The
requirement
must be met.
4 AP compatibility When customer using Aps not from
Cisco, compatibility test should be
passed
The
requirement
must be met.
WLAN features
1 802.11 protocol TM80 only support 802.11 a/b/g/n,
WLAN can't use other protocols
The
requirement
must be met.
2 Security mode TM80 supports:
WPA/WPA2-PSK or WPA2-Enterprise
EAP method:
PEAP-GTC, PEAP-
MSCHAPv2,EAP-TLS
WPA2-PSK is highly recommended.
WPA2-Enterprise may increase
probability of offline when roaming,
so not be recommended.
WLAN can't use other security
mode.
The
requirement
must be met.
3 AP MAC address The broadcast MAC address of AP is
fixed (BSSID).
AP BSSID is used to locate the TM80
device. If it is changed, failure to
The
requirement
must be met.

Mindray BeneVision TM80 Specifications

General

Brand	Mindray
Model	BeneVision TM80
Category	Monitor
Language	English