TM80 Telemetry Monitor Service Manual 3-51
1. Click the circle on the left and click EDIT. On the configuration page,
perform the following configuration:
Network Authentication=WPA2-PSK
Data Encryption=AES
For the Network Key, please set it according to hospital IT. And you
need to input this key in TM80 menu.
Show Passphrase in clear Text=No
Wireless Customer Security Separation=Disable
VLAN ID=1
The figure below shows the specific configuration.
2. Click APPLY in the lower right corner to save the setting.
To Next Page
Loading...
Need help?
General
