Mirion Technologies AVIOR-2 - Page 36

USE MANUAL
AVIOR-2/AVIOR-2 I/O & MIP-2/MIP-2 I/O
34 / 118
106491_C User manual AVIOR-2 MIP-2_En.docx
MIRION TECHNOLOGIES (Canberra) S.A.S, BP249, ZI de Vauzelles, 3760
2
Loches Cedex
Press the key to start another recording of the measurement.8.
At the end of the measurement, the triggering of the low threshold alarm or the high threshold alarm
(Refer to § 12.1 for setting the thresholds) can occur:
– Exceeding the low threshold ( ), AVIOR-2 / MIP-2 triggers a sound alarm and the lights are
flashing amber.
Note: For 2-channel probes, only the LED of the channel concerned changes to the flashing amber
state.
Press a key on the keyboard to temporarily inhibit the sound alarm. The sound is reactivated
automatically at exit of the measuring mode.
– Exceeding the high threshold ( ), AVIOR-2 / MIP-2 triggers a sound alarm and the LED are
flashing red.
Note: For 2-channel probes, only the LED of the channel concerned changes to the flashing red state.
Press a key on the keyboard to temporarily inhibit the sound alarm. The sound is reactivated
automatically at exit of the measuring mode.
)
)
),
),