15 LATCH FUNCTION
15.3 Latch Settings
131
15
15.3 Latch Settings
Latch settings
This subsection describes the latch setting.
This format is supported by the FX5S and FX5U/FX5UC CPU modules.
Setting latch on devices
A range of multiple latches can be set for 1 type of device. Two latch ranges, latch (1) and latch (2), can be set. However,
make sure that the range of latch (1) and latch (2) is not overlapping.
■Latch range setting
Set the device to latch, its range, and the latch type.
"Device Setting" window
1. Click "Detailed Setting" on the
"Device Setting" window.
2. In the "Device Setting" window,
select the type of latch for the
target device. The "Latch
Range Setting" window is
displayed.
Navigation window
[Parameter] [Module model
name] [CPU Parameter]
"Memory/Device Setting"
"Device/Label Memory Area
Detailed Setting" "Device
Setting" "Detailed Setting"
"Latch Range Setting" window
3. Check the tab for the latch type,
select the device to set and set
the latch range (Start, End).
To Next Page
Loading...
