Mitsubishi Electric MELSEC iQ-F FX5 - 35.7 Procedure to Execute the Built-in Analog Function

676
35 CPU MODULE BUILT-IN ANALOG FUNCTION
35.7 Procedure to Execute the Built-in Analog Function
35.7 Procedure to Execute the Built-in Analog Function
The procedure to execute the built-in analog function is described below.
1. Confirm the specifications of the built-in analog function.
Confirm the specifications of the built-in analog function. (Page 572 Specifications)
2. Connect the CPU module to the external device.
Wiring to external devices. (Page 677 Wiring)
3. Set the parameters.
Set the parameters to configure the built-in analog function. (Page 678 Parameter Setting)
4. Create the program.
Create the program to use the built-in analog function.
5. Run the program.
Precautions
Do not write to the special relay/special register in the user interrupt program.