Mitsubishi Electric MELSEC iQ-F FX5 - 6 CAPACITY SETTING OF EACH AREA IN DEVICE;LABEL MEMORY; 6.1 Default Capacity of Each Area

6 CAPACITY SETTING OF EACH AREA IN DEVICE/LABEL MEMORY
6.1 Default Capacity of Each Area
81
6
6 CAPACITY SETTING OF EACH AREA IN
DEVICE/LABEL MEMORY
The capacity of each area in device/label memory can be specified.
For FX5UJ CPU module, the setting cannot be changed but the content can be checked.
6.1 Default Capacity of Each Area
The default capacity of each area is as follows.
(1) The capacity of each area can be changed. (Page 83 Device/Label Memory Area Setting)
(2) The number of points of user devices can be changed. (Page 84 Device Setting)
Item Capacity
Device (high speed) Area Capacity 12 K words
Device (standard) Area Capacity 35 K words
Label Area Capacity 12 K words
Latch Label Area Capacity 1 K words
(2)
(1)