25 HIGH-SPEED INPUT/OUTPUT FUNCTION
25.1 High-speed Counter Function
235
25
High-speed counter function execution procedure
The high-speed counter function execution procedure is as follows.
1. Check the specifications of the high-speed counter.
Check specifications such as maximum frequency and type of high-speed counter. (Page 236 High-speed counter
specifications)
2. Connect the CPU module to the external device.
For details on wiring to external devices, refer to the following manual
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
3. Set the parameters.
Set parameters such as channel (CH) of the high-speed counter. (Page 248 High-speed counter parameters)
4. Create the program.
Create program for using the high-speed counter.
5. Run the program.
To Next Page
Loading...
