Mitsubishi Electric MELSEC iQ-F FX5 - 3.3 Files; File type and storage destination memory

3 CPU MODULE MEMORY CONFIGURATION
3.3 Files
51
3
3.3 Files
The CPU module files are explained below.
File type and storage destination memory
File types and their storage destination memory are explained below.
: Can be stored, : Cannot be stored
*1 Can be stored but cannot operate as a function.
*2 mmm indicates the module number (3-digit hexadecimal). nn is the serial number (2-digit hexadecimal) for each module.
*3 nn corresponds to the setting number and is 01 through 04.
*4 For serial communications file.
*5 For Ethernet file.
*6 n is 0 through F.
vvvv is the version information. (4-digit decimal)
*7 mm is the intelligent function module information.
vvvv is the version information. (4-digit decimal)
*8 mmm is the module number, nnn is the number of modules, and oooo is the serial number.
*9 Only FX5U/FX5UC CPU module is supported.
*10 xxxxxx is the version information.
File type CPU built-in memory SD memory card File name (extension)
Data memory
Drive No.4 Drive No.2
Program ANY_STRING.PRG
FB files ANY_STRING.PFB
CPU parameters CPU.PRM
System parameters SYSTEM.PRM
Module parameters UNIT.PRM
Module extension parameter (for intelligent function module) UEXmmmnn.PRM
*2
Memory card parameter MEMCARD.PRM
Device comments ANY_STRING.DCM
Device initial values ANY_STRING.DID
Event history EVENT.LOG
Device data storage file 
*1
DEVSTORE.QST
Global label setting file GLBLINF.IFG
General-purpose data ANY_STRING. (CSV/BIN)
Data logging setting file LOGnn.LIS
*3
Memory dump setting file MEMDUMP.DPS
Remote password 00000001.SYP
Module extension parameter (for protocol setting) UEX3FF01.PPR
*4
UEX3FF00.PPR
*5
Firmware update ■FX5S CPU module
• F5Snvvvv.SYF
*6
■FX5UJ CPU module
• F5Jnvvvv.SYF
*6
■FX5U/FX5UC CPU module
• F50nvvvv.SYF
*6
■Intelligent function module
• F5mmvvvv.SYF
*7
Firmware update prohibited 
*1
FWUPDP.SYU
System file for backing up CPU module data $BKUP_CPU_INF.BSC
Device/label data file for backing up CPU module data BKUP_CPU_DEVLAB.BKD
System file for CPU module auto exchange function $BKUP_CPU_EXCHANGE.DAT
Extended file register file EXFILER.ERD
Device station parameter file SLAVEmmmnnnoooo.NSP
*8*9
Web server binary file F5WebFilexxxxxx.HVF
*10