4 DEVICES
4.13 Initial Device Value Setting
77
4
Character string constant
The character string can be specified by enclosing it with single quotation marks (' ') or double quotation marks (" "). (Example:
"ABCDE") Note that the NULL character
*1
becomes the termination character.
*1 Character string: 00H
Unicode character string: 0000H
For details on character string data, refer to the following.
MELSEC iQ-F FX5 Programming Manual (Instructions, Standard Functions/Function Blocks)
4.13 Initial Device Value Setting
Directly sets the initial value of a device used by the program (i.e., not via the program).
(1) If initial device values are used, a program to set data to the devices becomes unnecessary.
SM402
MOV H100 D0
MOV H2020 D0
(1)
CPU module
CPU module
Device initial value setting Device memory
To Next Page
Loading...
