Mitsubishi Electric MELSEC iQ-F FX5 - PWM output function execution procedure; PWM output parameters

332
25 HIGH-SPEED INPUT/OUTPUT FUNCTION
25.7 PWM Function
PWM output function execution procedure
The procedure for executing the PWM output function is explained below.
1. Check the specifications of PWM output.
Check specifications such as pulse output performance of PWM output. (Page 329 PWM output specifications)
2. Connect the CPU module to the external device.
For details on wiring to external devices, refer to the following manual
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
3. Set the parameters.
Set the output destination, cycle, pulse width, output pulse logic, etc. of the PWM in parameters, (Page 332 PWM output
parameters)
4. Create the program.
Create the program for using PWM output.
5. Run the program.
PWM output parameters
This section explains the PWM output parameters.
Set the PWM output parameters in GX Works3.
Outline of parameters
PWM output parameters are output destination, pulse width/cycle unit, output pulse logic, pulse width, and period.
Parameter setting
This section explains how to set the PWM output parameters.
Set the output destination, pulse width/cycle unit, output pulse logic, pulse width, period, etc. of the channel to be used.
■CPU module
Navigation window  [Parameter]  [Module model name]  [Module Parameter]  [High Speed I/O]  "Output
Function"  "PWM"  "Detailed Setting"
Window