26 OUTLINE
26.2 Setup Procedure for Positioning Control
343
26
26.2 Setup Procedure for Positioning Control
1. Check specifications of incorporated positioning functions
For performance specifications, input specifications and output specifications, refer to Page 346 SPECIFICATIONS.
For control function and auxiliary function, refer to Page 358 POSITIONING CONTROL FUNCTION.
For connection equipment specifications, refer to the manual for each connection equipment.
2. System configuration and unit selection
Refer to the following manual and the manual for each connection equipment.
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
3. Wiring
Refer to the following manual and the manual for each connection equipment.
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
4. Parameter settings in GX Works3
*1
For setting method and details of parameters, refer to Page 376 POSITIONING PARAMETER.
For table setting method and operations of control method, refer to Page 510 TABLE OPERATION.
5. Creating programs in GX Works3
*1
For details of each positioning instruction, refer to Page 419 POSITIONING INSTRUCTION.
For common items of each positioning instruction and cautions for program creation, refer to Page 554 PROGRAMMING.
*1 For details on connecting procedures to a CPU module and operating procedures of GX Works3, refer to GX Works3 Operating
Manual.
To Next Page
Loading...
