Mitsubishi Electric MELSEC iQ-F FX5 - 9.2 Update Using the Engineering Tool; CPU module firmware update

9 FIRMWARE UPDATE FUNCTION
9.2 Update Using the Engineering Tool
99
9
9.2 Update Using the Engineering Tool
CPU module firmware update
The CPU module firmware can be updated by using the engineering tool. This function enables the firmware to be updated
without using an SD memory card.
Target models
The target models are listed below.
*1 These models are offered for specific regions.
Supported engineering tool
The engineering tool supporting the firmware update function is shown below.
Product name Model name
FX5S CPU module FX5S-30MR/ES, FX5S-30MT/ES, FX5S-30MT/ESS, FX5S-40MR/ES, FX5S-40MT/ES, FX5S-40MT/ESS, FX5S-60MR/ES,
FX5S-60MT/ES, FX5S-60MT/ESS, FX5S-80MR/ES
*1
, FX5S-80MT/ES
*1
, FX5S-80MT/ESS
*1
Engineering tool Software version
GX Works3 "1.080J" or later
Engineering toolFirmware
update file
CPU module