380
30 POSITIONING PARAMETER
30.1 Setting Method
*1 Only FX5S/FX5U/FX5UC CPU module and high-speed pulse input/output module can use this item or setting.
*2 PULSE/CW is fixed to the output device (Y) of "axis number -1".
*3 In the CW/CCW mode, PULSE/CW and SIGN/CCW are fixed to Y0 (CW)/Y2 (CCW), Y1 (CW)/Y3 (CCW).
*4 The number in is first module: 5, second module: 7, third module: 9, fourth module: 11.
*5 : Head input/output number for each high-speed pulse input/output module
Input check
The usage status of the input device (X) can be checked from the input check window.
■CPU module
[Navigation window] [Parameter] Module model name [Module Parameter] [High Speed I/O] [Input Check]
[Positioning]
■High-speed pulse input/output module
[Navigation window] [Parameter] [1 to 16 (high-speed pulse input/output module)] [Module Parameter] [Input
Check] [Positioning]
Shown above is the screen at the time when the first high-speed pulse input/output module is selected.
To Next Page
Loading...
