Mitsubishi Electric MELSEC iQ-F FX5 - Programs example; Operating procedure

156
19 DATA LOGGING FUNCTION
19.3 Procedure for Using
Programs example
The following shows a program example of executing data logging in Setting example 1 and Setting example 2.
Operating procedure
This section shows the operating procedure for Setting example 1 and Setting example 2 (the CPU Module Logging
Configuration Tool windows show the setting details of Setting example 2).
Setting parameters
1. Start GX Works3 and create a new project.
[Project]  [New]
2. Select the details shown below and click [OK].
3. Click [OK] with the details shown below as-is.
4. Open "Memory/Device Setting" and check that "Function to Use Internal Buffer" is set to "Data Logging Function".
Navigation window  [Parameter]  [FX5UCPU]  [CPU Parameter]  [Memory/Device Setting]