Mitsubishi Electric MELSEC iQ-F FX5 - 28.3 Output Specifications

28 SPECIFICATIONS
28.3 Output Specifications
353
28
28.3 Output Specifications
This section describes the transistor output specifications of the CPU module and high-speed pulse input/output module.
Note that the simultaneous turning-on rate of the CPU module is restricted. For details on this restriction, refer to the following
manuals.
MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC User's Manual (Hardware)
CPU module
For MELSERVO series servo amplifiers, use a sink input/sink output type CPU module.
*1 When two COM (or +V) terminals are connected outside the CPU module, the total load current is 1.6 A or less. Where  indicates:
0, 1 or 2
To use the positioning instruction, adjust the load current of the NPN open collector output to 10 to 100 mA (5 to 24 V DC).
Item Specifications
External power supply 5 to 30 V DC
Maximum load FX5S-MT/ 0.5 A/point
The total load current per common terminal should be the following value or less.
• 3 output point common: 0.6 A
• 4 output point common: 0.8 A
FX5UJ-MT/ 0.5 A/point
The total load current per common terminal should be the following value or less.
• 3 output point common: 0.6 A
• 4 output point common: 0.8 A
FX5U-MT/ 0.5 A/point
The total load current per common terminal should be the following value or less.
• 4 output point common: 0.8 A
• 8 output point common: 1.6 A
FX5UC-MT/ Y0 to Y3: 0.3 A/point
Y4 or subsequent: 0.1 A/point
The total load current per common terminal should be 0.8 A
*1
or less.
Open-circuit leakage current 0.1 mA or less at 30 V DC
Voltage drop when
ON
FX5S-MT/ Y0 to Y3 1.0 V or less
FX5UJ-MT/ Y0 to Y2 1.0 V or less
FX5U-MT/, FX5UC-MT/ Y0 to Y3
FX5S-MT/ Y4 or subsequent 1.5 V or less
FX5UJ-MT/ Y3 or subsequent
FX5U-MT/, FX5UC-MT/ Y4 or subsequent
Response time FX5S-MT/ Y0 to Y3 5 s or less at 10 mA or more (5 to 24 V DC)
FX5UJ-MT/ Y0 to Y2 2.5 s or less at 10 mA or more (5 to 24 V DC)
FX5U-MT/, FX5UC-MT/ Y0 to Y3
FX5S-MT/ Y4 or subsequent 0.2 ms or less at 200 mA (24 V DC)
FX5UJ-MT/ Y3 or subsequent
FX5U-MT/ Y4 or subsequent
FX5UC-MT/
Indication of output
motion
FX5S-MT/, FX5UJ-MT/, FX5U-MT/,
FX5UC-32MT/DS(S)-TS
LED on panel turns on when output
FX5UC-MT
/D(SS) LED on panel turns on when output (DISP switch OUT side)
Item Description
Operation voltage range 5 to 24 V DC
Operation current range 10 to 100 mA
Output frequency ■FX5S CPU module
100 kpps or less
■FX5UJ/FX5U/FX5UC CPU module
200 kpps or less