510
32 TABLE OPERATION
32.1 How to Use the Positioning Table
32 TABLE OPERATION
This chapter describes the table operation in the following items.
• How to use the positioning table in GX Works3
• Operations of each control method
• How to execute multiple tables (stepping operation and continuous operation)
32.1 How to Use the Positioning Table
The following procedure is required to perform positioning in table operation.
1. Set the positioning parameter in the high speed I/O parameter of GX Works3. (Page 376 Setting Method)
2. Set the table data in the high speed I/O parameter of GX Works3. (Page 510 How to Use the Positioning Table)
3. Program the table operation instruction. (Page 554 Table Operation Instruction)
This section describes procedure 2 above.
Table setting method
Set the table in the high speed I/O of GX Works3.
■CPU module
[Navigation window] [Parameter] Module model name [Module Parameter] [High Speed I/O] [Output
Function] [Positioning] [Detailed Setting] [Positioning Data]
*1
*1 When FX5SCPU/FX5UCPU is selected: Axis #1 Positioning Data to Axis #4 Positioning Data.
When FX5UJCPU is selected: Axis #1 Positioning Data to Axis #3 Positioning Data.
To Next Page
Loading...
